2-post vehicle lifts

Features & Benefits



• 9,000 lb. lift capacity
• 10' 7/8" overall column height is ideal for servicing vehicles in a low ceiling height
• Low profile drive-over floor plate for easy vehicle positioning
• 3-stage front and 3-stage rear arms accommodate a wide range of common cars, trucks, vans as well as SUVs within the same service bay
• Electric/hydraulic heavy-duty chain lifting operation with cable equalization to reduce ceiling height requirement
• Dual-point mechanical pull-lock cable release system
• Fully gusseted base plate design increases column rigidity
• Premium double telescoping screw pads adjust to multiple heights minimizing the need for adapters
• Powder coat finish provides long-lasting durability
• Plated arm restraints and arm pins inhibit rust and provide long-lasting durability
• Standard dual integrated rubber door guards help protect vehicle panels from inadvertent damage

Features & Benefits



• 9,000 lb. lift capacity
• Drive-on style pad aids in quick vehicle spotting for express bays
• Low-profile pad design minimizes vehicle clearance issues
• Reinforced front and rear access ramps are designed to easily flip up and lock to extend the platform length to accommodate longer wheelbase vehicles
• Standard column mounted spotting block storage caddy helps keep a safe and clean work environment
• 48" elongated carriage design increases lift life
• Oversized 5" diameter pulley and heavy duty 5/16" cable reduces stress on equalization system and increases cable life
• Padded overhead shut off system prevents vehicle damage
• Fully gusseted base plate design increases column rigidity
• Pulley-less jacketed single-point lock release system makes for smoother, easier operation and longer life
• Premium powder coat finish provides long-lasting durability
• Standard dual integrated rubber door guards help protect vehicle panels from inadvertent damage

Features & Benefits



• 10,000 lb. lift capacity 
• Versymmetric® offset front arms provide directSPOT™ to vehicle lift points and safely lifts both symmetrically and asymmetrically within the same service bay maximizing service capabilities and revenue potential 
• Oversized 5 in. diameter pulley and heavy duty 5/16 in. cable reduces stress on equalization system and increases cable life 
• 48 in. elongated carriage design increases lift life 
• Standard model fits 12 foot ceiling height. Additional 2 foot or 3 foot extensions available 
• Padded overhead shut off system prevents vehicle damage 
• Premium double telescoping screw pads adjust to multiple heights minimizing the need for adapters 
• Fully gusseted base plate design increases column rigidity 
• Pulley-less jacketed single-point lock release system makes for smoother, easier operation and longer life 
• Standard dual integrated rubber door guards help protect vehicle panels from inadvertent damage 
• Plated arm restraints and arm pins inhibit rust and provide long-lasting durability 
• Premium powder coat finish provides long-lasting durability

Features & Benefits



• 10,000 lb. lift capacity
• 3-stage front arms provide greater sweep for versatility and ease of spotting
• Can be installed in either symmetric or asymmetric position, depending on your service needs
• Premium double telescoping screw pads adjust to multiple heights minimizing the need for adapters
• Adjustable heights and widths provide versatility at installation for service facilities with special constraints
• Single-point mechanical lock release system allows technician to disengage both columns simultaneously
• Padded overhead shut off system prevents vehicle damage
• Premium powder coat finish provides long-lasting durability
• Plated arm restraints and arm pins inhibit rust and provide long-lasting durability
• Standard dual integrated rubber door guards help protect vehicle panels from inadvertent damage

Features & Benefits



• 3-Stage Versymmetric® front arms and 2-Stage rear arms provide a wide arm sweep for asymmetric and symmetric lifting in the same service bay.
• 11.875" standard height fits in service bays with 12' ceiling height.
• Double telescoping screw pads with rubber foot pad.
• Padded overhead shut-off system prevents vehicle damage.
• Jacketed pulley-less single-point mechanical lock release system that was once exclusive to our CL series lifts are now standard on the VLE10.
• Rubber door guards protect vehicle from door damage.
• Premium powder coat finish provides long-lasting durability.
• Plated arm restraints and arm pins inhibit rust and provide long-lasting durability.

Features & Benefits

• 3-Stage Front & Rear arms 
• Adjustable width from 11' 10" to 12' 10" 
• Designed to service electric and other wider vehicles when combined with TFPK footpad kit 
• 1' and 2' Column Extensions available 
• Low-Ceiling model available with column height of 11' 11" 

Features & Benefits

• 12,000 lb. lift capacity 
• Heavy-duty 2-stage arms enable a wide range of symmetric lifting 
• Single point mechanical lock release allows technician to disengage both columns simultaneously 
• Heavy-duty polyurethane screw pads accommodate a wide range of recommended lifting points 
• Adjustable column height accommodates higher profile vehicles and provides maximum headroom to work underneath vehicles 
• Padded overhead shut off system prevents vehicle damage 
• Powder coat finish provides long-lasting durability 
• Plated arm restraints and arm pins inhibit rust and provide long-lasting durability 
• Standard dual integrated rubber door guards help protect vehicle panels from inadvertent damage 

Features & Benefits

• 15,000 lb. lift capacity 
• Heavy-duty 2-stage arms enable heavy-duty symmetric lifting 
• Adjustable column height accommodates higher profile vehicles and provides maximum headroom to work underneath vehicles 
• Jacketed pulley-less single-point mechanical lock release system that was once exclusive to our CL Series 
• Padded overhead shut off system prevents vehicle damage 
• Powder coat finish provides long-lasting durability 
• Plated arm restraints and arm pins inhibit rust and provide long-lasting durability 
• Heavy-duty polyurethane screw pads accommodate a wide range of recommended lifting points 
• Standard dual integrated rubber door guards help protect vehicle panels from inadvertent damage

Features & Benefits

• Engineered to be wider, taller, and stronger. Ready to tackle the heaviest vehicles in any fleet. 
• Single-point air actuated lock release allows the technician to disengage both columns simultaneously. 
• Oversized 5" diameter steel pulley and heavy-duty 3/8" cable reduces stress on equalization system and increases cable life. 
• 60" lifting carriage design increases lift life. 
• Adjustable width and symmetrical design allow easy access to the vehicle's interior. 
• Dual integrated rubber door guards to prevent door damage.

Features & Benefits

• 20,000 lbs. capacity
• 2-Stage Front & Rear arms
• Adjustable width from 12' 10.75" to 13' 10.75"
• Adjustable columns allow for easy installation
• Optional 2' Column Extensions available

Low Maintenance Problem-Free Design

• 36” / 914mm high pressure cylinders in each column with 1-1/4” / 32mm leaf chain assist provides 71” / 1803mm of lift height.
• Tough wheelabrator finished steel structure with premium double bake finish.
• 
  

Flexible Vehicle Loading

• Offset Flexmetric front arms with longer, straight rear lifting arms for optimum asymmetric or symmetric loading opportunities.
• Low clearance lift arms are ideal for custom car repair.
• 
  

Reduced Installation Costs

• Simple installation of three structural components plus arms.
• Includes wedge-style anchor bolts and shims.

Reduced Vehicle Setup Time

• Drop-in style lift pads have a lowered height with rubber pad of 4” / 102mm and can be extended by using anodized drop-in adapters.
• The power unit can be installed on either column.
• 
  

Built to Exceed Industry Safety Standards

• Self-activating mechanical locks in each column, every 3” / 76mm.
• Built-in flow control and velocity fuse hydraulic protection.

Auto Tech Certified (ATC)

• The Lift superstore thoroughly reviews all lift products with an independent panel of professional automotive technicians to ensure that they meet the customer expectations for quality and performance.

Premium North American Components

• North American-made Monarch (Bucher) 2HP / 1.5kw power unit, 3/8” / 9.5mm equalizing cables, cylinders, and hoses.

More Models to Choose From

• Standard clear floor design for 12’ / 3657mm ceilings, or choose the baseplate style for 10’ / 3048mm ceilings.

Low Maintenance Problem-Free Design

• 36” / 914mm high pressure cylinders in each column with 1-1/4” / 32mm leaf chain assist provides 71” / 1803mm of lift height.
• Tough wheelabrator finished steel structure with premium double bake finish.

Flexible Vehicle Loading

• Offset Flex metric front arms with longer, straight rear lifting arms for optimum asymmetric or symmetric loading opportunities.
• Low clearance lift arms are ideal for custom car repair.

Reduced Installation Costs

• Simple installation of three structural components plus arms.
• Includes wedge-style anchor bolts and shims.

Reduced Vehicle Setup Time

• Drop-in style lift pads have a lowered height with rubber pad of 4” / 102mm and can be extended by using anodized drop-in adapters.
• The power unit can be installed on either column.

Built to Exceed Industry Safety Standards

• Self-activating mechanical locks in each column, every 3” / 76mm.
• Built-in flow control and velocity fuse hydraulic protection.
• Padded bar overhead shutoff prevents damage to higher vehicles.

Auto Tech Certified (ATC)

• The Lift superstore thoroughly reviews all lift products with an independent panel of professional automotive technicians to ensure that they meet the customer expectations for quality and performance.

Premium North American Components

• North American-made Monarch (Bucher) 2HP / 1.5kw power unit, 3/8” / 9.5mm equalizing cables, cylinders, and hoses.

More Models to Choose From

• Standard clear floor design for 12’ / 3657mm ceilings, or choose the baseplate style for 10’ / 3048mm ceilings.

Stronger and More Stable Structure

• Both the Deuce and the Cobra GT are built up to 20% heavier than many competitors.
• The lifts are designed with heavier arms, columns, and carriages that provide the extra strength required when lifting long box medium-duty trucks.
• The low drive-over height also accommodates most cars.

Corrosion-Resistant Protection

• Steel components are wheelabrator shot blasted and acid washed before a double bake powder coat finish is applied.

Lifts Higher to Provide More Under-Car Work Area

• The extended lifting height (Deuce) provides 76” / 1930mm lift without adapters with a maximum attainable lift height of 85” /2159mm (82” / 2083mm).

Flexible Vehicle Loading

• Flexmetric arm design use two-piece, offset front and two-piece, straight rear lifting arms for optimum asymmetric and symmetric loading opportunities.

Reduced Vehicle Setup Time

• Drop-in style lift pads have a lowered height with rubber pad of 4-1/2” / 114mm and can be extended by using anodized drop-in adapters.
• The power unit can be installed on either column.

Built to Exceed Industry Safety Standards

• Single point mechanical lock release with locks every 3” / 76mm.
• Built-in flow control and velocity fuse hydraulic protection.
• Padded bar overhead shutoff prevents damage to higher vehicles.

Auto Tech Certified (ATC)

• The Liftsuperstore thoroughly reviews all lift products with an independent panel of professional automotive technicians to ensure that they meet the customer expectations for quality and performance.
• 
  

Premium North American Components

• North American-made Monarch (Bucher) 2HP / 1.5kw power unit, 3/8” / 9.5mm equalizing cables, cylinders, and hoses
• 
  

More Models to Choose From



• Optional Flexmetric design with three-piece front and rear lifting arms, a symmetric version with equal length straight arms, extended height 172” / 4369mm, and choice of red or blue colors.

Corrosion-Resistant Protection

• Steel components are wheelabrator shot blasted and acid washed before a double bake powder coat finish is applied.

Lifts Higher To Provide More Under-Car Work Area

• 70-1/2’” / 1791mm long cylinder stroke provides 76” / 1930mm lift without adapters, with a maximum attainable lift height of 87” / 2210mm.

Flexible Vehicle Loading

• Flexmetric arm design uses three-piece offset front and three-piece straight rear lifting arms for optimum asymmetric and symmetric loading opportunities.

Reduced Installation Costs

• Field adjustable height and width can easily adapt to most installation dimensions.

Premium North American Components

• North American-made Monarch (Bucher) 2HP / 1.5kw power unit.
• 3/8”/9.5 equalizing cables.
• 2” / 51mm ID hydraulic cylinders.
• Provide a longer, more dependable service life.

Reduced Vehicle Setup Time

• Acme screw drop-in style lift pads have a lowered height with rubber pad of 4” / 102mm
• Lift pads can be extended by 1-1/2” / 38mm, 3” / 76mm, or 6” / 152mm using nickel-plated drop-in adapters.
• The power unit can be installed on either column.

Quiet Operation of Less Than <75 Decibels

• Rubber mounting grommets reduce power unit noise.
• 11” x 2” / 279mm x 51mm rubber door bumpers are mounted on the face of both lifting carriages to offer car door protection and reduce door damage.

Stronger and More Stable Structure

• Both, the Cobra GT is built up to 20% heavier than many competitors.
• The lifts are designed with heavier arms, columns, and carriages that provide the extra strength required when lifting long box medium-duty trucks.
• The low drive-over height also accommodates most cars.

Corrosion-Resistant Protection

• Steel components are wheelabrator shot blasted and acid washed before a double bake powder coat finish is applied.

Lifts Higher to Provide More Under-Car Work Area

• 1930mm lift without adapters with a maximum attainable lift height of 85” / 2159mm (82” / 2083mm).

Flexible Vehicle Loading

• Flexmetric arm design use two-piece, offset front and two-piece, straight rear lifting arms for optimum asymmetric and symmetric loading opportunities.

Reduced Vehicle Setup Time

• Drop-in style lift pads have a lowered height with rubber pad of 4-1/2” / 114mm and can be extended by using anodized drop-in adapters.
• The power unit can be installed on either column.

Built to Exceed Industry Safety Standards

• Single point mechanical lock release with locks every 3” / 76mm.
• Built-in flow control and velocity fuse hydraulic protection.
• Padded bar overhead shutoff prevents damage to higher vehicles.

Auto Tech Certified (ATC)

• The Liftsuperstore thoroughly reviews all lift products with an independent panel of professional automotive technicians to ensure that they meet the customer expectations for quality and performance.

Premium North American Components

• North American-made Monarch (Bucher) 2HP / 1.5kw power unit, 3/8” / 9.5mm equalizing cables, cylinders, and hose.

Corrosion-Resistant Protection

• Steel components are wheelabrator shot blasted and acid washed before a double bake powder coat finish is applied.

Lifts Higher To Provide More Under-Car Work Area

• 70-1/2’” / 1791mm long cylinder stroke provides 76” / 1930mm lift without adapters with a maximum attainable lift height of 87” / 2210mm.

Flexible Vehicle Loading

• Flexmetric arm design uses three-piece offset front and three-piece straight rear lifting arms for optimum asymmetric and symmetric loading opportunities.

Reduced Installation Costs

• Field adjustable height and width can easily adapt to most installation dimensions.

Premium North American Components

• North American-made Monarch (Bucher) 2HP / 1.5kw power unit.
• 3/8”/9.5 equalizing cables
• 2” / 51mm ID hydraulic cylinders.
• Provide a longer, more dependable service life.

Reduced Vehicle Setup Time

• Acme screw drop-in style lift pads have a lowered height with rubber pad of 4” / 102mm
• Lift pads can be extended by 1-1/2” / 38mm, 3” / 76mm, or 6” / 152mm using nickel-plated drop-in adapters.
• The power unit can be installed on either column.

Quiet Operation of Less Than <75 Decibels



• Rubber mounting grommets reduce power unit noise.
• 11” x 2” / 279mm x 51mm rubber door bumpers are mounted on the face of both lifting carriages to offer car door protection and reduce door damage.

Corrosion-Resistant Protection

• Steel components are wheelabrator shot blasted and acid washed before a double bake powder coat finish is applied.

Lifts Higher To Provide More Under-Car Work Area

• 70-1/2’” / 1791mm long cylinder stroke provides 76” / 1930mm lift without adapters, with a maximum attainable lift height of 87” / 2210mm.

Flexible Vehicle Loading

• Flexmetric arm design uses three-piece offset front and three-piece straight rear lifting arms for optimum asymmetric and symmetric loading opportunities.
• 
  

Reduced Installation Costs

• Field adjustable height and width can easily adapt to most installation dimensions.

Premium North American Components

• North American-made Monarch (Bucher) 2HP / 1.5kw power unit.
• 3/8”/9.5 equalizing cables
• 2” / 51mm ID hydraulic cylinders.
• Provide a longer, more dependable service life.

Reduced Vehicle Setup Time

• Acme screw drop-in style lift pads have a lowered height with rubber pad of 4” / 102mm
• Lift pads can be extended by 1-1/2” / 38mm, 3” / 76mm, or 6” / 152mm using nickel-plated drop-in adapters.
• The power unit can be installed on either column.

Quiet Operation of Less Than <75 Decibels

• Rubber mounting grommets reduce power unit noise.
• 11” x 2” / 279mm x 51mm rubber door bumpers are mounted on the face of both lifting carriages to offer car door protection and reduce door damage.

More Models to Choose From



• Standard Flexmetric design with three-piece lifting arms, asymmetric version<https://liftsuperstore.com/product/dakota-asymmetric-12000-lb-5-5t/> with equal length straight arms, and choice of red or blue colors.

Built to Higher Quality Standards in North America

• Premium US-made Monarch (Bucher) 4HP/ 3 kw power unit.
• 3/8” / 9.5mm non-fatigue equalizing cables.
• 5”/ 127mm steel pulleys.
• 2”/ 51mm ID hydraulic cylinders.

More Working Room for Larger Trucks

• 120-1/2 ”/ 3061mm between the inside of the columns and 192-1/2” / 4890mm under the shut-off bar.

Stronger and More Stable Structure

• Single-piece columns 15” x 9”/ 381mm x 230mm up to 199-1/4” / 5061mm tall can be custom ordered to fit your building.
• Large irregular shaped baseplate 17” x 31” / 432 x 787mm.

Corrosion-Resistant Protection

• Steel components are wheelabrator shot blasted and acid washed before a double bake powder coat finish is applied.

Lifts Higher to Provide More Under-Car Work Area

• The 72’”/ 1829mm long cylinder stroke provides 76” / 1930mm lift without adapters with a maximum attainable lift height of 85-1/2” / 2172mm.

Ease of Operation

• Positive air release mechanical locking system with stainless steel air cylinders.
• Includes a built-in air regulator / filter water trap.
• The power unit can be installed on either side.

Reduced Vehicle Setup Time

• Drop-in steel saddle style lift adapters can be extended in height with 1-1/2”/ 38mm, 4” / 102mm, or 10”/ 254mm steel adapters.

More Options to Choose From

• Available in a medium-duty to heavy-duty models ranging from 15,000 lb./ 6.8T to 20,000 lb. / 9.2T capacity.
• Liberator models feature light to heavy non-sag arms and pad height between 3-1/2”/ 89mm and 5-1/2” / 140mm.

Built to Higher Quality Standards in North America

• Premium US-made Monarch (Bucher) 4HP/ 3 kw power unit.
• 3/8” / 9.5mm non-fatigue equalizing cables.
• 5”/ 127mm steel pulleys.
• 2”/ 51mm ID hydraulic cylinders.

More Working Room for Larger Trucks

• 120-1/2 ”/ 3061mm between the inside of the columns and 192-1/2” / 4890mm under the shut-off bar.

Stronger and More Stable Structure

• Single-piece columns 15” x 9”/ 381mm x 230mm up to 199-1/4” / 5061mm tall can be custom ordered to fit your building.
• Large irregular shaped baseplate 17” x 31” / 432 x 787mm.

Corrosion-Resistant Protection

• Steel components are wheelabrator shot blasted and acid washed before a double bake powder coat finish is applied.

Lifts Higher to Provide More Under-Car Work Area

• The 72’”/ 1829mm long cylinder stroke provides 76” / 1930mm lift without adapters with a maximum attainable lift height of 85-1/2” / 2172mm.

Ease of Operation

• Positive air release mechanical locking system with stainless steel air cylinders.
• Includes a built-in air regulator / filter water trap.
• The power unit can be installed on either side.

Reduced Vehicle Setup Time

• Drop-in steel saddle style lift adapters can be extended in height with 1-1/2”/ 38mm, 4” / 102mm, or 10”/ 254mm steel adapters.

More Options to Choose From



• Available in a medium-duty to heavy-duty models ranging from 15,000 lb./ 6.8T to 20,000 lb. / 9.2T capacity
• Liberator models feature light to heavy non-sag arms and pad height between 3-1/2”/ 89mm and 5-1/2” / 140mm.

Built to Higher Quality Standards in North America

• Premium US-made Monarch (Bucher) 4HP/ 3 kw power unit.
• 3/8” / 9.5mm non-fatigue equalizing cables.
• 5”/ 127mm steel pulleys.
• 2”/ 51mm ID hydraulic cylinders.

More Working Room for Larger Trucks

• 120-1/2 ”/ 3061mm between the inside of the columns and 192-1/2” / 4890mm under the shut-off bar.

Stronger and More Stable Structure

• Single-piece columns 15” x 9”/ 381mm x 230mm up to 199-1/4” / 5061mm tall can be custom ordered to fit your building.
• Large irregular shaped baseplate 17” x 31” / 432 x 787mm.

Corrosion-Resistant Protection

• Steel components are wheelabrator shot blasted and acid washed before a double bake powder coat finish is applied.

Lifts Higher to Provide More Under-Car Work Area

• The 72’”/ 1829mm long cylinder stroke provides 76” / 1930mm lift without adapters with a maximum attainable lift height of 85-1/2” / 2172mm.

Ease of Operation     

• Positive air release mechanical locking system with stainless steel air cylinders.
• Includes a built-in air regulator / filter water trap.
• The power unit can be installed on either side.

Reduced Vehicle Setup Time

• Drop-in steel saddle style lift adapters can be extended in height with 1-1/2”/ 38mm, 4” / 102mm, or 10”/ 254mm steel adapters.

More Options to Choose From



• Available in a medium-duty to heavy-duty models ranging from 15,000 lb./ 6.8T to 20,000 lb. / 9.2T capacity.
• Liberator models feature light to heavy non-sag arms and pad height between 3-1/2”/ 89mm and 5-1/2” / 140mm.

Built to Higher Quality Standards in North America

• Premium US-made Monarch (Bucher) 4HP/ 3 kw power unit.
• 3/8” / 9.5mm non-fatigue equalizing cables.
• 5”/ 127mm steel pulleys.
• 2”/ 51mm ID hydraulic cylinders.

More Working Room for Larger Trucks

• 120-1/2 ”/ 3061mm between the inside of the columns and 192-1/2” / 4890mm under the shut-off bar.
• 
  

Stronger and More Stable Structure

• Single-piece columns 15” x 9”/ 381mm x 230mm up to 199-1/4” / 5061mm tall can be custom ordered to fit your building.
• Large irregular shaped baseplate 17” x 31” / 432 x 787mm.

Corrosion-Resistant Protection

• Steel components are wheelabrator shot blasted and acid washed before a double bake powder coat finish is applied.

Lifts Higher to Provide More Under-Car Work Area

• The 72’”/ 1829mm long cylinder stroke provides 76” / 1930mm lift without adapters with a maximum attainable lift height of 85-1/2” / 2172mm.

Ease of Operation

• Positive air release mechanical locking system with stainless steel air cylinders.
• Includes a built-in air regulator / filter water trap.
• The power unit can be installed on either side.

Reduced Vehicle Setup Time



• Drop-in steel saddle style lift adapters can be extended in height with 1-1/2”/ 38mm, 4” / 102mm, or 10”/ 254mm steel adapters.