SCISSOR LIFTS

Features & Benefits

• 7,700 lb. lifting capacity
• 74.5" rise height (70" if flush mounted)
• Reinforced diamond-plate front and rear access ramps are designed to easily flip up and lock to extend the platform load length, which will accommodate longer wheelbase vehicles
• Double scissor lifting for taller rise allows more overall working clearance
• Single point air actuated lock release allows ergonomic working height for technicians to increase productivity and minimize fatigue
• Power unit console includes three simple push button controls 
• 3"rubber spotting blocks (set of 4) and 1.5" rubber spotting blocks (set of 4) included
• Extended ramp kit available for low profile vehicles 
• Powder coat finish provides long-lasting durability
• Can be mounted above ground or flush
  

Features & Benefits

• Package includes two (2) rolling jacks, turn plates, and an airline kit for dual jack operation
• Extra wide runway width accommodates single and dual rear wheel vehicles
• Photo cell ensures runway synchronization
• Automatic light feature illuminates the underside of the vehicle and turns off when lift is lowered below 18”
• Maintenance-reduced rear slip plates use oversized, encapsulated bearings to protect against environment debris
• Twin hydraulic cylinders provide smooth operation
• Approach ramps are equipped with end rollers to minimize noise and reduce floor damage
• Single point air actuated lock release allows ergonomic working height for technicians to increase productivity and minimize fatigue
• Powder coat finish provides long-lasting durability
• Can be mounted above ground or flush
• ALI certified
  

Model Number: LSSMC2000

The Decker is a rugged scissor lift that is ideal for repairing motorcycles, ATVs, or snowmobiles. This tough and dependable lift has a solid construction and an air/hydraulic operating system. Rear tire drop-out and a front-wheel vise make motorcycle servicing easy. The side extension kit comes standard, allowing you to work on a variety of extra-wide bikes, sleds, or trikes.

Auto Tech Certified (ATC)

• The Lift SuperStore thoroughly reviews all lift products with an independent panel of professional automotive technicians to ensure that they meet customer expectations for quality and performance.

Stable At Any Working Height 

• Strong tubular scissor lifting legs and base frame provide greater stability than cantilever-style lifts.
• Please note that your equipment may be up to 2,000 lb. / 1T.

Portable with No Installation Required

• It can be located virtually anywhere in your home or shop.
• The lightweight, compact design allows the lift to be easily moved or stored when not used.
• Overall footprint required to operate 49-1/4” / 1251mm wide x 109” / 2769mm long (with side panels and approach ramps).

Multi-Purpose Design

• Excellent for general repairs, maintenance, and cleaning
• 2 removable side deck extensions providing 8-3/4” / 222mm of stable platform surface for most motorcycles, ATVs, and snowmobiles.

Corrosion-Resistant Protection

• Steel structural components are Wheelabrator shot blasted and acid washed before a double bake powder coat finish.

Ideal for Either Hobby or Commercial Use

• The lift is built to meet industry standards.
• Three-position mechanical locking system with a fail-safe hydraulic velocity fuse in the cylinder.
• Includes high-efficiency box-style air/hydraulic turbopump.

Ideal Solution for Tires, Brakes, or Restoration

• Lifts 40” / 1016mm in 30 seconds for quick access to the vehicle.
• No obstruction around the lift improves productivity.

Model Number: LSSMR6

The Hemi Roadrunner is an all-purpose portable, hinged scissor lift. It is a great lifting alternative for garages that allows you to work on your vehicle while standing up. No installation is required, and the robust design allows it to be used indoors or outside. This model offers a lifting capacity of 6,000 lb. (2.7T).

Premium North American Components

• North American-made Monarch (Bucher) power unit and twin 2” / 51mm ID hydraulic cylinders provide a longer more dependable service life.

Multi-Purpose Design Excellent for Cars, SUVs, and Light Trucks

• Adjustable rotating swing arms provide maximum reach.
• Stacking adapters provide an overall maximum lifting height of 60” / 1524mm.

Corrosion-Resistant Protection

• Steel structural components are Wheelabrator shot blasted and acid washed before a double bake powder coat finish.

Ideal for Either Hobby or Commercial Use

• Available in either 220v 1 phase 15 amp or 110v 1 phase 15 amp power supply.
• · Built to industry standards and comes with a seven-position mechanical locking system and fail-safe hydraulic velocity fuse in each cylinder.

Ideal for Low Ceiling or Minimal Space

• Compact space-saving design is only 40” / 1016mm wide by 99-1/2” / 2527mm long with a frame lowered height of 5-1/2” / 140mm.

Model Number: LSSMR66

The Spider is a mid-rise scissor lift with a compact design that is ideal for tires, brakes, body repair, and fast lube changes. This model offers a lifting capacity of 6,600 lb. (3T).

Compact Design and Rugged Construction

• Small footprint takes up less bay space, while still allowing best-in-class weight capacities.
• Only 78 3/4” / 2000mm wide x 86 1/2” / 2200mm long.

Versatility and Ease of Use

• Ideal for small compact cars up to light-duty trucks with pull-out extensions allowing ease of use on short or long-wheelbase vehicles.
• No tie bar or floor obstruction.

Volumetric Control

• Single-cylinder with dual chambers keeps the unit level all the time.
• No electronic sensors are required on the lift.

Lower Maintenance and Less Downtime

• No electronic sensors or equalization valve
• Extra-large pins with accessible grease fittings
• Ideal equipment for high-duty cycle shops that require less downtime.

Built for Safety

• 5 locking positions ensure side-to-side stability.
• Eliminates the accidental lowering of the lift.
• Single-point air cylinder lock release.

Unobstructed Access

• Open front and rear construction with no tire bars or torsion rods
• Unobstructed access to the underside of most vehicles with 27”/ 686mm to 38” / 965mm of working area between the superstructures.

Easy Vehicle Spotting

• A flat deck platform and spotting blocks allow quick set-up by the operator increasing bay productivity.

Low Profile Approach Ramps or Flush Mount Options

• Low profile ramps 4-1/8” / 105mm collapsed height allow for access to smaller compact cars while still allowing for heavier loads.
• The lift can also be flush mounted for the ultimate in productivity and space-saving bay solutions.
  

Model Number: LSSDS9

The Monza is a full-rise, medium-duty scissor lift that is capable of safely servicing vehicles of a range of sizes. This model offers a lifting capacity of 9,000 lb. (4T).

Compact Design and Rugged Construction

• Small footprint takes up less bay space, while still allowing best-in-class weight capacities.

Versatility and Ease of Use

• Ideal for small compact cars up to light-duty trucks with pull-out extensions allowing ease of use on short or long-wheelbase vehicles.

Volumetric Control

• Single-cylinder with dual chambers keeps the unit level all the time.

Lower Maintenance and Less Downtime

• No electronic sensors or equalization valve
• Extra-large pins with accessible grease fittings
• Ideal equipment for high-duty cycle shops that require less downtime.

Built for Safety

• 21 locking positions ensure side-to-side stability.
• Eliminates the accidental lowering of the lift.

Unobstructed Access

• Open front and rear construction with no tire bars or torsion rods
• Unobstructed access to the underside of most vehicles with 27”/ 686mm of working area between the superstructures.

Easy Vehicle Spotting

• A flat deck platform and spotting blocks allow quick set-up by the operator increasing bay productivity.
• Low-profile Approach Ramps or Flush Mount Options
• Low-profile ramp extensions allow for access to smaller compact cars while still allowing for heavier loads.
• The lift can also be flush mounted for the ultimate in productivity and space-saving bay solutions.

Model Number: LSSSL12FD

The Spacelogic is a commercial platform scissor lift, which is capable of safely servicing commercial vehicles in a range of sizes. This model offers a lifting capacity of 12,000 lb./ 5.4T and features double-wall runways with Z-rails. Designed for precision wheel alignment or service, this lift is available with surface or flush-mounted 185” / 4700mm long runways

Built to Higher Quality Standards

• Features North American-made premium Leeson 3HP / 2.2kw motor and HPI pump.

Superior Structural Strength Provides Longer Life and More Precise Alignments

• Non-flex double-wall runways with built-in Z-rail
• Heavy-duty 3” x 6.5” x 3/8” / 76mm x 165mm x 9.5mm wall tubular legs.

Premium Options and Accessories

• Built-in tire inflation hoses.
• Removable work steps.
• LED runway lighting.
• Premium, heavy-duty extended-life HD jacking beams with a 5-year warranty.

Lower Maintenance Costs

• Steel components are Wheelabrator shot blasted and acid washed before a double bake powder coat finish is applied.
• Zirk-style grease fittings at all hinge points.

Precision Leveling Feature Provides More Accurate Alignments

• PCB Control with linear transducer control level to within 5/32” / 4mm.
• The fully adjustable floor-mounted rack and pinion-style gear blocks allow for precise leveling.

Designed for Greater Technician Productivity

• There are no obstructions between the runways or base frame.
• The lift rises 74” / 1880mm in 45 seconds with 20 locking positions.
• Built-in runway compressed air outlets front and rear.

More Models to Choose From

• Available in surface or flush mounted, alignment, or service deck.
• Choice of floor-mounted console control or space-saving wall/floor-mounted power unit with pendant control.
  

Model Number: LSSSL14FD

The Spacelogic is a commercial platform scissor lift, which is capable of safely servicing commercial vehicles in a range of sizes. This model offers a lifting capacity of 14,000 lb. / 6.4T and features double-wall runways with Z-rails. Designed for precision wheel alignment or service, this lift is available with surface or flush-mounted

203” / 5156mm long runways.

Built to Higher Quality Standards

• Features North American-made premium Leeson 3HP / 2.2kw motor and HPI pump.

Superior Structural Strength Provides Longer Life and More Precise Alignments

• Non-flex double-wall runways with built-in Z-rail
• Heavy-duty 3” x 6.5” x 3/8” / 76mm x 165mm x 9.5mm wall tubular legs.

Premium Options and Accessories

• Built-in tire inflation hoses.
• Removable work steps.
• LED runway lighting.
• Premium, heavy-duty extended-life HD jacking beams with a 5-year warranty.

Lower Maintenance Costs

• Steel components are Wheelabrator shot blasted and acid washed before a double bake powder coat finish is applied.
• Zirk-style grease fittings at all hinge points.

Precision Leveling Feature Provides More Accurate Alignments

• PCB Control with linear transducer control level to within

       5/32”/4 mm.

• The fully adjustable floor-mounted rack and pinion-style gear blocks allow for precise leveling.

Low-Pressure Hydraulics Provide Longer Life

• 2” x 6”/51 mm x 152 mm break-out cylinders allow the 25” x 4-1/2” /635 mm x 114 mm ID cylinders to operate at <2500 psi under full load.

Designed for Greater Technician Productivity

• There are no obstructions between the runways or base frame.
• The lift rises 74”/1880 mm in 58 seconds with 20 locking positions.
• Built-in runway compressed air outlets front and rear.

More Models to Choose From

• Available in surface or flush mounted, alignment, or service deck.
• Choice of floor-mounted console control or space-saving wall/floor-mounted power unit with pendant control.

Model Number: LSSSL16FD

The Spacelogic is a commercial platform scissor lift, which is capable of safely servicing commercial vehicles in a range of sizes. This model offers a lifting capacity of 16,000 lb./7.3T and features double-wall runways with Z-rails. Designed for precision wheel alignment or service, this lift is available with surface or flush-mounted

203”/5156 mm long runways.

Built to Higher Quality Standards

• Features North American-made premium Leeson 3HP / 2.2kw motor and HPI pump.

Superior Structural Strength Provides Longer Life and More Precise Alignments

• Non-flex double-wall runways with built-in Z-rail
• Heavy-duty 3” x 6.5” x 3/8” / 76mm x 165mm x 9.5mm wall tubular legs.

Premium Options and Accessories

• Built-in tire inflation hoses.
• Removable work steps.
• LED runway lighting.
• Premium, heavy-duty extended-life HD jacking beams with a 5-year warranty.

Lower Maintenance Costs

• Steel components are Wheelabrator shot blasted and acid washed before a double bake powder coat finish is applied.
• Zirk-style grease fittings at all hinge points.

Precision Leveling Feature Provides More Accurate Alignments

• PCB Control with linear transducer control level to within

       5 /32” /4mm.

• The fully adjustable floor-mounted rack and pinion-style gear blocks allow for precise leveling.

Low-Pressure Hydraulics Provide Longer Life

2” x 6” / 51mm x 152mm break-out cylinders allow the 25” x 4-1/2” / 635mm x 114mm ID cylinders to operate at <2500 psi under full load.

Designed for Greater Technician Productivity

There are no obstructions between the runways or base frame.

The lift rises 74” / 1880mm in 58 seconds with 20 locking positions.

Built-in runway compressed air outlets front and rear.

More Models to Choose From

• Available in surface or flush mounted, alignment, or service deck.
• Choice of floor-mounted console control or space-saving wall/floor-mounted power unit with pendant control.